Wedding Rings / All rings are made on commission. Finding the right design is a mutual process. First we have a preliminary talk followed by a noncommittal sketching phase. When a design has been approved and a deposit payed the actual work can begin. Usually there is a size testing before the finish is made, to ensure a perfect fit. In addition, you can choose a hand engraving for the rings.

Please contact me for an appointment or simply come by the shop for a noncommittal talk about your wishes.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 01
Material / silver / 14kt white gold
About / A design with an angular pattern in two grey tones: Silver contrasting with the darker white gold. One ring has a soft square shape.

WEDDING RING 02 – ELLIPSE RING
Material / silver / 18kt white gold.
About / This design is simple and elegant. A white gold ellipse runs across a wide silver band as a symbol of eternal love. The design only works well on a wide ring to achieve a good effect of the ellipse.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 03 – MÖBIUS STRIP
Material / 18kt gold
About / This set of rings are made as Möbius strips – a commision and challenge from a couple of mathematicians. The symbolism of the infinite strip is perfect for wedding bands and the result very elegant. 

WEDDING RINGS 04
Material / silver / 14kt white & rose gold / 18kt gold
About / The three stripes of gold represent the three children of the couple. In this design the colour palette I work with is clearly visible: the silver base and the gold, white gold and rose gold stripes.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 05 – “LS”
Material / silver / 18kt white & rose gold
About This set of rings shows an abstract pattern with the initials L and S. The design is made across a wide band and then divided in two bands afterwards, so the rings each show half of the pattern and fit together as a whole.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 06 – “AM”
Material / silver / 14kt white and rose gold
About / This couple wished to have stripes along the ring and in the sketching phase I came up with the idea of incorporating their initials A and M, too.

WEDDING RINGS 07
Material / 18kt white gold & gold / silver / diamonds
About A set of rings in the soft square shape. The rings are made in different alloys of gold to match the couple’s individual preferences but share the silver band waving along the rings.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 08 – “SM”
Material / 18kt white gold / silver
About This set of rings shows an abstract pattern with the initials S and M. The design is made across a wide band and then divided in two bands afterwards, so the rings each show half of the pattern and fit together as a whole.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 09
Material / 18kt white gold & gold / diamonds
About The gentleman’s ring features a graphic “M” inlaid in white gold. The design of the lady’s ring origins in the Zigzag ring with the extra detail of an “L” incorporated in a diamond stripe. Thus both have each other’s initial in their ring.

WEDDING RINGS 10
Material / 18kt white gold & gold / diamond
About The lady’s ring feature a tall jagged setting made to match the engagement ring – a Zigzag ring. The gentleman’s ring has a jagged patch of gold inlaid in the white gold as a reference to the design of the lady’s ring so the rings appear as a set.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RING 11 – SPLIT RING
Material / 18kt gold
About A lovely variation of the Wave design, where the ring branches out and meets again. A more simple and airy look if you’re not into diamonds but like the organic shape.

WEDDING RING 12
Material / 18kt gold / champagne diamonds
About The design of the lady’s ring shown here origins in the Wave ring, with the extra detail that the diamond wave forms an “M”. The gentleman’s ring was made in silver with a white gold  “J” inlaid. So each has the other’s initial in their ring, despite two completely different designs.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 13 – K & D
Material / silver / 18kt white gold
About The rings have a white gold stripe along one edge, that respectively on the lady’s and gentleman’s ring grows into a “K” and a “D”. Each has the other’s inital in their ring. Simple, graphic and personal.

WEDDING RINGS 14
Material / silver / 18kt gold
About These rings are both made in a soft square shape. The lady’s ring is made in gold with a silver band and the gentleman’s ring is made with the same materials but opposite order.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 15
Material / silver / 18kt white gold
About The pattern of the rings matches a tattoo with a special meaning to the couple. The design is made across a wide band and then divided in two bands afterwards, so the rings each show half of the pattern and fit together as a whole.

WEDDING RINGS 15
Material / silver / 18kt white gold
About Here you see how the pattern fits as a whole when the rings are held together. Beautiful and symbolic.

Wedding Rings / Sofie Lunøe
Wedding Rings / Sofie Lunøe

WEDDING RINGS 16
Material / 18kt white & rose gold & gold / silver / diamonds
About The design for this set of rings origins in the coat of arms of the groom’s family. On the lady’s ring two swan heads hold a diamond between their beaks and the coat of arms and other symbols from is featured on the gentleman’s ring.

WEDDING RING 17
Material / 18kt gold / olive green diamonds
About A classic lady’s ring with a band of diamond pavé along the ring. The pavé setting is ideal for wedding bands as the stones are level with the surface. This design can also be made with a  rounded profile on the ring and with other diamond colours, e.g. champagne or white.

When creating wedding rings I often use a technique called “married metals”. A number of metal alloys are soldered together and the contrasting colours form a pattern. A bit like Intarsia – inlaid wood. The surface is smooth and the pattern seen as colour tones. “Married metals” is suitable for crafting very personal and unique rings. The initials of the couple, special symbols or references can be incoporated in the design.

My colour “palette” is silver (light grey), white gold (dark grey), gold and rose gold.

I also apply this technique when crafting other jewellery to match the rings. It can be cuff links, earrings or pendants. Ideal presents for bride and groom or for other special occasions such as anniversaries or birthdays.